🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc.misc
Article #9218

Re: Question about Dos and backgrounded programs:

#9218
From: Peter da Silva
Date: Mon, 15 Apr 1991 15:51
19 lines
1518 bytes
In article <1991Apr14.233111.28957@leland.Stanford.EDU> shedevil@leland.Stanford.EDU (Annie) writes:
> Is there a way to designate which job I want to 'exit' to, so that I
> can go back and forth between the two?

No.

This is a reasonable question, but you need to understand something about
DOS: it's not really an operating system. It's a file system and program
loader. When you call DOS from some program it loads COMMAND.COM and passes
control to it... completely. The previously loaded program is hidden. Think
of it as a stack: you push a program on top of the stack, and pop one off.

There are operating systems you can buy that load under DOS and provide an
interface to it: DesqView, Windows, DoubleDOS, etc... perhaps one of those
will let you do what you want. Or you could switch to a computer with a real
operating system, but I suspect that's not an option.
-- 
Peter da Silva.  `-_-'  peter@ferranti.com
+1 713 274 5180.  'U`  "Have you hugged your wolf today?"
Technical Details
Message-ID: <UXQAJX8@xds13.ferranti.com>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!mips!dimacs.rutgers.edu!rutgers!njin!uupsi!ficc!peter
References: <1991Apr14.233111.28957@leland.Stanford.EDU>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!mips!dimacs.rutgers.edu!rutgers!njin!uupsi!ficc!peter
From: peter@ficc.ferranti.com (Peter da Silva)
Newsgroups: comp.sys.ibm.pc.misc,comp.misc,comp.editors
Subject: Re: Question about Dos and backgrounded programs:
Message-ID: <UXQAJX8@xds13.ferranti.com>
Date: 15 Apr 91 15:51:52 GMT
References: <1991Apr14.233111.28957@leland.Stanford.EDU>
Reply-To: peter@ficc.ferranti.com (Peter da Silva)
Organization: Xenix Support, FICC
Lines: 19