Need help to transfer BASIC files from IBM-PC to VAX

Article View: comp.sys.ibm.pc.misc

Article #9710

Back to comp.sys.ibm.pc.misc Previous Next

#9710

From: Murthy S Gandikota
Date: Sat, 04 May 1991 19:51

14 lines
979 bytes

Hi,

I have looked up the FAQ file and couldn't find questions on this subject.
Here's my problem:

I have written BASIC programs on an IBM-PC. Due to speed constraints,
I am trying to run them on a VAX. So I used Kermit under the hope that
the IBM files are in ASCII. But they are not! Is there someway to
convert/save my programs in ASCII?

Thanks for reading this message.

Murthy

Technical Details

Message-ID: <1991May4.195110.11525@magnus.acs.ohio-state.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!murthy

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!murthy
From: murthy@magnus.acs.ohio-state.edu (Murthy S Gandikota)
Subject: Need help to transfer BASIC files from IBM-PC to VAX
Message-ID: <1991May4.195110.11525@magnus.acs.ohio-state.edu>
Originator: murthy@top.magnus.acs.ohio-state.edu
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: top.magnus.acs.ohio-state.edu
Organization: The Ohio State University
Distribution: na
Date: Sat, 4 May 1991 19:51:10 GMT
Lines: 14