🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc.programmer
Article #1486

Re: How do get COMx to do 19,200 baud

#1486
From: Dick Gardner
Date: Wed, 07 Mar 1990 12:39
57 lines
2840 bytes
In article <33150@prls.UUCP> gordon@prls.UUCP (Gordon Vickers) writes:
	[Deleted text to shrink message]
>    The serial cards I have seen do not buffer the incoming data and this
>  bothers me, I've written ALOT of serial communications code (on a variety
>  of other machines) and have never liked dealing with charector interupt
>  devices.  What I would like to find is a serial card that
>  does buffer the data and lets me know in some more polite manner
>  that data is ready, and interupt me only if the high water mark is
>  reached. If anyone knows of such a card then I would very much appreciate
>  hearing about it since this type of solution would unburden the CPU
>  enough to assure me that the PC will be a suitable platform.  Ideally,
>  I'm looking for an RS422 serial card that supports tri-stating the
>  transmitters but I could live with RS232 becouse I've already designed and 
>  implimented an RS422 converter.
>
Gordon 
You might check out the following:

	Intellicon-2  (2 - RS232C or RS422/485 channels)
	Intellicon-4  (4 - RS232C or RS422-485 channels)
	Intellicon-8  (8 - RS232C channels)

   *	Will run 38.4K on all ports  (Intellicn-8 runs 19.2K on all ports)
   *	Uses Z80B processor & DARTS
   *	Requires block of memory between 640K & 1meg
   *	Memory and port addresses switch-selectable
   *	16-bit card - uses IRQ 2-7,10,11,12,14,15
   *	Comes w/drivers for MANY operating systems

Made by:

	Connect Tech Inc.
	20-340 Woodlawn Road West
	Guelph, Ontario
	Canada, N1H 7K6
	(519) 836-1291
  FAX:	(519) 836-4878

They have a U.S. distributor, if that is a problem.

We've used these boards in a variety of machines with several operating
systems with great success.  

#include <usual.disclaimer>
	I'm only a satisfied customer.

=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
   Dick Gardner -- Eastman Kodak Co.  Rochester, New York  14652-4201
                   Phone: (716) 477-1002
                   UUCP: rutgers!rochester!kodak!gardner
		   Net:  gardner@kodak.com

	My new whiz-bang computer is SOOOOOOO fast ----
	  (How fast is it??)	it executes an infinite loop in 50 msec!!!

=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
  
Technical Details
Message-ID: <2386@kodak.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!bellcore!texbell!wuarchive!udel!rochester!kodak!gardner
References: <32894@prls.UUCP> <2956@jato.Jpl.Nasa.Gov> <8422@chaph.usc.edu> <33150@prls.UUCP>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!bellcore!texbell!wuarchive!udel!rochester!kodak!gardner
From: gardner@kodak.UUCP (Dick Gardner)
Newsgroups: comp.sys.ibm.pc.programmer
Subject: Re: How do get COMx to do 19,200 baud
Summary: There IS a card.
Message-ID: <2386@kodak.UUCP>
Date: 7 Mar 90 12:39:41 GMT
References: <32894@prls.UUCP> <2956@jato.Jpl.Nasa.Gov> <8422@chaph.usc.edu> <33150@prls.UUCP>
Reply-To: gardner@kodak.UUCP (Dick Gardner)
Distribution: usa
Organization: Eastman Kodak Co, Rochester, NY
Lines: 57