Article View: comp.sys.ibm.pc.programmer
Article #88Re: HP LASERJET SERIES II
From: Steve Harrold
Date: Mon, 19 Mar 1990 17:03
Date: Mon, 19 Mar 1990 17:03
21 lines
1257 bytes
1257 bytes
Re: Resetting LaserJet to power on state
>>> Does anyone know what the ESC-sequence is to reset the HP LASERJET
>>> SERIES II to a powerup condition? If it is not an ESC-sequence, does
>>> anyone know how to do it without physically getting up and pressing
>>> the RESET-key on the printer? Thanks.
The use of the "Reset" sequence or operator panel commands will NOT clear
soft fonts and macros that have been declared as "permanent" when they were
downloaded into the LJ.
Instead of physically doing a poweroff/poweron sequence, send the following
12-byte stream to your LaserJet:
ESC E (the traditional Reset)
ESC *c0F (delete all soft fonts {that's a zero eff})
ESC &f6X (delete all macros)
The ESC is really the escape character (hex 1B).
Case is significant; use upper and lower case characters exactly as shown.
Technical Details
Message-ID:
<100010003@hpcupt1.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!apple!motcsd!hpda!hpcupt1!swhReferences:
<8686@chaph.usc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!apple!motcsd!hpda!hpcupt1!swh From: swh@hpcupt1.HP.COM (Steve Harrold) Newsgroups: comp.sys.ibm.pc.programmer Subject: Re: HP LASERJET SERIES II Message-ID: <100010003@hpcupt1.HP.COM> Date: 19 Mar 90 17:03:31 GMT References: <8686@chaph.usc.edu> Organization: Hewlett Packard, Cupertino Lines: 21