🚀 go-pugleaf

In article <10735@darkstar.ucsc.edu>, hugo@saturn.ucsc.edu (Hugo Calendar) writes:
> I'm having trouble getting one of my IBM RT's to boot.  It keeps trying
> to read from the floppy drive over and over, even though there's
> nothing in it.  It should boot from the hard drives when there's
> nothing in the floppy drive.  What should I do?

You did not say if you were running AOS or AIX, but on an RT running
AIX, you CAN set the nvram to indicate the boot device.  
Under AOS, your milage may vary. :-)

The following key sequences are documented in the VRM programming 
reference appendix C.      

The folowing keyboard key sequences only update the data in NVRAM.

  CTRL+ALT+a   update nvram for diskette drive #1
  CTRL+ALT+b   update nvram for diskette drive #2
  CTRL+ALT+c   update nvram for fixed-disk device #1
  CTRL+ALT+d   update nvram for fixed-disk device #2
  CTRL+ALT+e   update nvram for fixed-disk device #3

These are other key sequences that are also defined:
  CTRL+ALT+PAUSE   performs soft re-ipl of cpu. re-ipl vrm and initate
                   ipl from default IPL sequence or from defined sequence
                   set by CTRL+ALT+(a,b,c,d,e)
  CTRL+ALT+HOME    perform re-ipl of virtual machines, does not re-ipl VRM.
  CTRL+ALT+'pad 6' Power-on-reset ipl. same as power on sequence.
  CTRL+ALT+'pad 7' perform VRM dump of real memory to floppy dump diskettes.
  CTRL+ALT+'pad 8' perfomr dump of selected areas of memory
  CTRL+ALT+'pad 4' invoke VRM debugger (if loaded)
  CTRL+ALT+END     perform dump of first virtual machine.
  CTRL+ALT+DEL     perform IPL of optional co-processor.
  CTRL+ALT+ACTION  exits co-processor mode.

This has gotten quite a few people over time. :-)

Later,
Markw
-- 
Mark Whetzel     My comments are my own, not my company's.
Western Geophysical - A division of Western Atlas International,
A Litton/Dresser Company           DOMAIN addr: markw@airgun.wg.waii.com
				   UUNET address:  uunet!airgun!markw