Hardware Flow Control on 4 Port Serial Cards

Article View: comp.sys.ibm.pc.rt

Article #1537

Back to comp.sys.ibm.pc.rt Previous Next

#1537

From: Charlie Pilzer
Date: Tue, 17 Jan 1989 05:59

13 lines
1023 bytes

After a year of frustration and much to my amazement, I have learned that the
AIX supports hardware flow control on the serial ports.  The trick is to set
the 'pro' parameter to 'dc' when using the 'devices' command.  Then, the hardware
busy line from the peripheral must be routed to the CTS input on the RT.  The
IBM 10 pin to rs232 printer cable will support hardware handshaking.

I was unable to find this information in the manuals.  If it is documented, I
would appreciate a pointer to the pages.  It was only through a conversation with
a friend (Thanks Ted) that I found out that this might work on my machine's
configuration.

Charlie Pilzer
uunet!beartrk!clp

Technical Details

Message-ID: <276@beartrk.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!netsys!beartrk!clp

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!netsys!beartrk!clp
From: clp@beartrk.UUCP (Charlie Pilzer)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Hardware Flow Control on 4 Port Serial Cards
Keywords: Flow Control
Message-ID: <276@beartrk.UUCP>
Date: 17 Jan 89 05:59:04 GMT
Organization: Bear Track Computer Co., Takoma Park, MD.
Lines: 13