Article View: comp.sys.ibm.pc.rt
Article #1756Re: Connecting IBM PC RT to Ethernet
From: Allan D. Griefer
Date: Sun, 07 May 1989 06:06
Date: Sun, 07 May 1989 06:06
20 lines
1373 bytes
1373 bytes
In a recent append, rainwatr@ucqais.uc.edu (Donald J. Rainwater) writes... >... >When the RT is started, it tries to configure the ethernet device (net0). >After a period of time, I get a console message saying that net0 has timed >out, and that the device has been removed from the configuration. ... Offhand, it sounds as if the plugging on the Ethernet adapter is set differently from the specification in the devices command. Check out the values set by devices by issuing: showdev adapt net0 from within devices and printing the results. Compare the rsa and il1 fields to the interrupt level and starting address on the card. Note that rea, brsa, and brea must be consecutive to rsa. Hope this helps. Opinions are strictly my own, Allan D. Griefer, IBM Almaden Research Center, San Jose, CA BITNET: GRIEFER at ALMADEN Internet: griefer@ibm.com UUCP: ...!uunet!ibmarc!griefer
Technical Details
Message-ID:
<813@ks.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!ibmarc!grieferReferences:
<1667@ucqais.uc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!ibmarc!griefer From: griefer@ibmarc.uucp (Allan D. Griefer) Newsgroups: comp.sys.ibm.pc.rt,comp.os.vms Subject: Re: Connecting IBM PC RT to Ethernet Message-ID: <813@ks.UUCP> Date: 7 May 89 06:06:26 GMT References: <1667@ucqais.uc.edu> Sender: news@ibmarc.UUCP Reply-To: griefer@ibmarc.UUCP (Allan D. Griefer) Organization: IBM Almaden Research Center Lines: 20