Re: zmodem under AIX 2.2.1

Article View: comp.sys.ibm.pc.rt

Article #1837

Back to comp.sys.ibm.pc.rt Previous Next

#1837

From: Herb Peyerl
Date: Fri, 08 Dec 1989 13:43

13 lines
1193 bytes

grund@pyrite.som.cwru.edu (Victor Grund) writes:
>behaving as though it received a ^S after the last block is sent.  This 
>happens both when sending and receiving with binary files.  These problems do 
>not show up when using piped input and output. 

Please post any answers to the above posting since I and another site
downstream of myself are having the same problems with zmodem.  Something
we've found to clue us in to the problem is that everything works fine
on binary files until the RT receive's a NAK.  It acts as though nothin
happened and continues to send.. Again, as Victor mentioned, this does
not happen in piping mode... I wonder if maybe my modem could be the
cause of this problem.  I have an HST and I think the HST has a 1K
buffer... Could this be part of the problem do you think?

Technical Details

Message-ID: <68@blender.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!mit-eddie!uw-beaver!ubc-cs!alberta!calgary!xenlink!blender!root

References: <1989Dec7.021249.4312@usenet.ins.cwru.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!mit-eddie!uw-beaver!ubc-cs!alberta!calgary!xenlink!blender!root
From: root@blender.UUCP (Herb Peyerl)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Re: zmodem under AIX 2.2.1
Message-ID: <68@blender.UUCP>
Date: 8 Dec 89 13:43:49 GMT
References: <1989Dec7.021249.4312@usenet.ins.cwru.edu>
Lines: 13

Reply to Parent Message