IBM/4.3 Kernel build with hc?

Article View: comp.sys.ibm.pc.rt

Article #1854

Back to comp.sys.ibm.pc.rt Previous Next

#1854

From: Chet Ramey
Date: Fri, 12 Jan 1990 21:16

14 lines
1013 bytes

I just got my IBM/4.3 source distribution, and I'd like to draw on the
experience of others who have rebuilt kernels from source.  Is it `safe'
to use hc - I think my version is 2.1o - to compile the 4.3 kernel? 
I've seen hc generate bad code, generate incorrect code, and generate
code the assembler will reject.  I don't really want to use PCC because
of it's total lack of optimization, but I will if I have to.

Thanks in advance.

-- 
Chet Ramey
Network Services Group				"Help! Help! I'm being
Case Western Reserve University			 repressed!"
chet@ins.CWRU.Edu

Technical Details

Message-ID: <1990Jan12.211654.14004@usenet.ins.cwru.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!usenet.ins.cwru.edu!cwns1.INS.CWRU.Edu!chet

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!usenet.ins.cwru.edu!cwns1.INS.CWRU.Edu!chet
From: chet@cwns1.INS.CWRU.Edu (Chet Ramey)
Newsgroups: comp.sys.ibm.pc.rt
Subject: IBM/4.3 Kernel build with hc?
Message-ID: <1990Jan12.211654.14004@usenet.ins.cwru.edu>
Date: 12 Jan 90 21:16:54 GMT
Reply-To: chet@po.CWRU.Edu (Chet Ramey)
Organization: Case Western Reserve Univ. Cleveland, Ohio, (USA)
Lines: 14