4208 proprinter XL24 usage on IBM rt under AIX 2.2.1

Article View: comp.sys.ibm.pc.rt

Article #331

Back to comp.sys.ibm.pc.rt Previous Next

#331

From: Mark Whetzel
Date: Mon, 11 Sep 1989 20:18

24 lines
1506 bytes

I have been having problems with connecting my IBM proprinter XL24 parallel
port version to my IBM RT running AIX 2.2.1   

Even though the printer supports a quite a few different modes and features 
the printer command and piobe backend are having problems understanding
properly the different command switches.   For example,  the
print -cdp command should put the printer in condensed print (16 cpi) mode.

THis works on 4202 printers, and appears to be ignored for the 4208.  I 
currently have the printer defined as a 4202 as there is no 'devices' command
settings for the 4208 printer.  The only other options for a parallel printer
are as a 4201 or a 5152 printer.   Any suggestions?  OTher print modes
are having problems as well, and are too numerious to go into gory detail 
here.  

Thanks.

Mark Whetzel

-- 
Mark Whetzel     My comments are my own, not my company's.
Western Geophysical - A division of Western Atlas International,
A Litton/Dresser Company           DOMAIN addr: markw@airgun.wg.waii.com
...!texbell!moray!airgun!markw     UUNET address:  uunet!airgun!markw

Technical Details

Message-ID: <33@airgun.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!airgun!markw

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!airgun!markw
From: markw@airgun.UUCP (Mark Whetzel)
Newsgroups: comp.sys.ibm.pc.rt
Subject: 4208 proprinter XL24 usage on IBM rt under AIX 2.2.1
Keywords: RT IBM 4208
Message-ID: <33@airgun.UUCP>
Date: 11 Sep 89 20:18:48 GMT
Organization: Western Geophysical, Houston
Lines: 24