Article View: comp.sys.ibm.pc.rt
Article #632Re: WD1005 as 2nd controller in PC/RT
From: John Bunda
Date: Mon, 22 Jan 1990 23:21
Date: Mon, 22 Jan 1990 23:21
20 lines
1214 bytes
1214 bytes
In article <91@blender.UUCP>, herb@blender.UUCP (Herb Peyerl) writes: > My question therefore is: Does anyone know how to make a WD1005-ARM > controller act as a second controller? Assuming your MFM controller is compatable with the ST506, this should work (I have two RTs set up this way). The jumper settings shown in the Setup Guide are correct, but the cabling is shown wrong (at least in my setup book). The connectors on the second controller need to be on J2 and J3 of the wd1005a-arm, not J2 and J4 as shown in the book. -John -- ...................................................... John Bunda METRIC Project Voice: (512) 471-9710 UT Austin CS Dept. Internet: bunda@cs.utexas.edu Austin, Texas 78712
Technical Details
Message-ID:
<109@darkstar.cs.utexas.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!bundaReferences:
<91@blender.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!bunda From: bunda@cs.utexas.edu (John Bunda) Newsgroups: comp.sys.ibm.pc.rt,comp.sys.ibm.pc Subject: Re: WD1005 as 2nd controller in PC/RT Summary: check the cabling Message-ID: <109@darkstar.cs.utexas.edu> Date: 22 Jan 90 23:21:03 GMT References: <91@blender.UUCP> Followup-To: comp.sys.ibm.pc.rt Organization: U. Texas CS Dept., Austin, Texas Lines: 20