Switch to RAW mode using IOCTL; gives error

Article View: comp.sys.ibm.pc.rt

Article #712

Back to comp.sys.ibm.pc.rt Previous Next

#712

From: John van Leeuwen
Date: Wed, 26 Aug 1992 15:02

8 lines
802 bytes

Switching to RAW mode seems to be quite easy, at least if
one thinks using the System V code on a said to be BSD unix
But: ioctl() returns an I/O error when I did it.

The routine I used is taken from the book UNIX network programming
by W.Richard Stevens.

I would be grateful for any info, or a working routine.

Technical Details

Message-ID: <johnvl.714841328@dutepp1>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sun4nl!dutrun!donau!johnvl

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.rt
Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sun4nl!dutrun!donau!johnvl
From: johnvl@dutepp1.et.tudelft.nl (John van Leeuwen)
Subject: Switch to RAW mode using IOCTL;  gives error
Message-ID: <johnvl.714841328@dutepp1>
Keywords: RAW mode
Sender: news@donau.et.tudelft.nl (UseNet News System)
Nntp-Posting-Host: dutepp1.et.tudelft.nl
Organization: Delft University of Technology, Dept. of Electrical Engineering
Date: Wed, 26 Aug 1992 15:02:08 GMT
Lines: 9