🚀 go-pugleaf

Hello RS users!  Are we having fun yet?

Here is my problem:

    I'm trying to write write some data to a tape from an RS 6000, and
then read the tape on an RT 125.  The RS is running with the 9021
build of version 3.  The RT is running version 2.2.1.  SO far I have
not been able to read any tape on the RT that was created on the RS.
I have attempted everything from dd to backup.  I have used the '-o'
flag with the backup command, just as it is stated in the manual page.
I also set the ECC flag to disable for the tape device (instructions
form IBM), using smit.

    When I use 'dd' I get a message of "0+0 records in ...".  When I
use tar I get "0 blocks on tape".  When I use backup, and attempt to
restore the tape, I get "Tape not in backup format".  When I use cpio,
it just gets lost.  I have tried combinations of tar, cpio, backup
piped to dd, still no succes.

     I am using an RT 125 with a high-density tape drive.  (don't know
the model right off hand, but it is an IBM drive)

    Has anybody out there done this?  I've contacted IBM AIX support
for the RS, but they haven't given me any solutions that have worked.

Thanks in advance.

Brad Craig           "Look at the                       (513) 865-1536   
Mead Data Central       size of those              Interactive Systems
P.O. Box 933              winches!"             mead!brad@uccba.uc.edu
Dayton, Ohio  45401        Dave Letterman          ...!uccba!mead!brad