Re: Moving data from RS 6000 to RT 125 via tape.

Article View: comp.sys.ibm.pc.rt

Article #771

Back to comp.sys.ibm.pc.rt Previous Next

#771

From: Dave Edmondson
Date: Thu, 28 Jun 1990 04:23

19 lines
1287 bytes

In article <807@meaddata.mead.UUCP> brad@mead.UUCP (Brad Craig) writes:
brad> [... trouble writing tapes ...]

this is from memory - so may be wrong (!).
the rs/6000 can read/write qic150, and can read qic24.  the rt will
(almost certainly) not read qic150.  i talked to someone at ibm about
this quite a while ago and the answer was `they are expected to be on
a network'.  if this is the case, then you can move stuff from rt to
rs/6000, but not the other way.
	anyone from ibm (or elsewhere) care to correct me here ?

dave.

--
                            Dave Edmondson
Department of Computing, Imperial College, 180 Queen's Gate, London SW7 1BZ UK
               phone: 071-589-5111 x5085 fax: 071-581-8024
        dme@doc.ic.ac.uk, ..!ukc!icdoc!dme, dme@athena.mit.edu

Technical Details

Message-ID: <DME.90Jun28052332@elsinore.doc.ic.ac.uk>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!icdoc!tgould.doc!dme

References: <807@meaddata.mead.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!icdoc!tgould.doc!dme
From: dme@doc.ic.ac.uk (Dave Edmondson)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Re: Moving data from RS 6000 to RT 125 via tape.
Message-ID: <DME.90Jun28052332@elsinore.doc.ic.ac.uk>
Date: 28 Jun 90 04:23:32 GMT
References: <807@meaddata.mead.UUCP>
Sender: news@doc.ic.ac.uk
Organization: Systems Support, Department of Computing, Imperial College
Lines: 19
In-reply-to: brad@mead.UUCP's message of 27 Jun 90 17:18:20 GMT

Reply to Parent Message