🚀 go-pugleaf

In <1990Oct8.154314.10429@athena.mit.edu> jfc@athena.mit.edu (John F Carr) writes:

>In article <5711@mace.cc.purdue.edu> lzm@mace.cc.purdue.edu (Chris McCoy) writes:
>>I'm desperately trying to get help to figure out why my RISC/6000 fails
>>during power-up with an error code of '552'.  The '552' error is not
>>documented in the diagnostic manuals and my CE is stumped. 

>/etc/rc.boot4 contains these lines on our system:

>showled 0x551
># bring up the root volume group
>/etc/ipl_varyon -v
>if [ $? != 0 ]
>then
>        while :
>        do
>                showled 0x552
>        done
>fi

>It looks like either the volume table on disk or the root filesystem on the
>boot image is corrupt.  I have no clue what you can do about this.

Mucho Gracis to everyone that responded.  Most people had the correct
answer, or at least were very close.  I even got replies from some
*real* programmers in Austin (:-) ).  In the end, the support line
was where I got the response.  They're good -- use 'em.

The problem turned out to be that the log logical volume hd8 had been
corrupted, hence the failure of the script above.  I had to boot from
diskette and get a shell, run /etc/continue and /etc/aix/logform.
(If you have the same problem call the support line -- it's painless)

As John Carr showed (script portion above) the startup scripts actually
display LED values upon failure, so there is another place to search
for answers on a system failure.  Of course, it doesn't help much if you
only have the one system.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Chris McCoy                         : INTERNET:   mccoy@acn.purdue.edu
Systems Programmer                  : UUCP:       ...!ecn-ee!mccoy
Ag. Computer Network, Purdue Univ.  : VOICE:      (317) 494-8333
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=