Re: PC RT hardware questions

Article View: comp.sys.ibm.pc.rt

Article #977

Back to comp.sys.ibm.pc.rt Previous Next

#977

From: Stefan M. Vorkoetter
Date: Thu, 22 Nov 1990 15:52

15 lines
1138 bytes

The RT we have has two serial ports on the motherboard (planar in IBM
wording).  We also have a four port ASYNC adapater, giving us a total
of six ports.  Can I now plug in a standard AT 2 port serial card? If
so, will there be any conflicts with interrupts and such.  I suspect
that the slots are AT compatible, but that it is not really a bus. In
other words, each slot is separate, and two identical cards plugged
into different slots will not necessarily interfere with one another.

Comments?  Suggestions?

Stefan Vorkoetter
Technical Manager
Waterloo Maple Software
(smvorkoetter@daisy.waterloo.edu)

Technical Details

Message-ID: <1990Nov22.155240.26006@watdragon.waterloo.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!maytag!watdragon!daisy.waterloo.edu!smvorkoe

References: <1990Nov16.210555.1322@ultra.com> <1990Nov14.004522.i@>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.rt,comp.sys.ibm.pc.hardware
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!maytag!watdragon!daisy.waterloo.edu!smvorkoe
From: smvorkoe@daisy.waterloo.edu (Stefan M. Vorkoetter)
Subject: Re: PC RT hardware questions
Message-ID: <1990Nov22.155240.26006@watdragon.waterloo.edu>
Sender: daemon@watdragon.waterloo.edu (Owner of Many System Processes)
Organization: University of Waterloo
References: <1990Nov16.210555.1322@ultra.com> <1990Nov14.004522.i@>
Date: Thu, 22 Nov 90 15:52:40 GMT
Lines: 16

Reply to Parent Message