Thread View: comp.sys.ibm.pc.rt
3 messages
3 total messages
Started by Michael Dahl
Tue, 18 Jul 1989 00:41
Getting a TrailBlazer Plus working at high speed
Author: Michael Dahl
Date: Tue, 18 Jul 1989 00:41
Date: Tue, 18 Jul 1989 00:41
9 lines
952 bytes
952 bytes
Has anyone had any luck getting a Telebit TrailBlazer Plus working at high speed ( >= 9600 baud ) with an IBM RT running AIX 2.2.1? We have the two native serial ports on the 6150-125 along with some ports on a Dicken's 16 port card available. Any help would be greatly appreciated. -------------------------------------------------------------------------- Michael Dahl uucp - uunet!bally!dahl Bally Systems domain - dahl@bally.bally.com 255 Bell Street Phone (702) 323-6156 x882 Reno, NV 89503 FAX (702) 323-5997
Re: Getting a TrailBlazer Plus working at high speed
Author: Geir Arnesen
Date: Fri, 21 Jul 1989 20:23
Date: Fri, 21 Jul 1989 20:23
14 lines
964 bytes
964 bytes
Yes, we are using it in communication between Oslo and New York and are achieving 9600 baud, on phone lines which we are not able to make communication at all with regulary modems (not even 300 baud). Geir A. /* * Geir Arnesen - Aftenposten * adress: Akersgt.51, P.b. 1178, Sentrum, 0107 Oslo 1, Norway * UUCP: ...mcvax!ndosl!aftp!arnesen * Internet: arnesen@aftenp.uu.no * Phone: +47-2-863232 Priv: +47-2-809133 FAX: +47-2-426325 TLX: 71230 aftp N */
Re: Getting a TrailBlazer Plus working at high speed
Author: Nicholas J. Simicich
Date: Mon, 24 Jul 1989 02:07
Date: Mon, 24 Jul 1989 02:07
14 lines
1193 bytes
1193 bytes
In article <146@bally.Bally.COM> dahl@bally.Bally.COM (Michael Dahl) writes: >Has anyone had any luck getting a Telebit TrailBlazer Plus working at >high speed ( >= 9600 baud ) with an IBM RT running AIX 2.2.1? Seems to work just fine for me, at 19,200, using the planar serials. I don't have a Dickens card, so I can't testify to how that works. Make sure you have a recent level of maintenance. I lock the interface speed at 19,200, and let the modem match slower callers. Unfortunately, RTS/CTS flow control is not supported, but for UUCP, I find that it works to just turn flow control off. -- Nick Simicich --- uunet!bywater!scifi!njs --- njs@ibm.com (Internet)
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads