🚀 go-pugleaf

Tom,
Make Sure that the first PCI slot is VACANT!!!
Do not put anything there at all...
And I agree, one card at a time... 
Put the Live in PCI slot 2..
Put the 3Com in the last ISA slot..
Put the USR in PCI slot 3...

Start with the SBLive...
IN the BIOS, under the Peripherals section,
make sure that you indicate NO to PNP OS Installed??

Good luck, it will work...

Tom wrote:
> 
> Hmm, the mobo is a Venus 5MVP3, but searching it on hte net seems to come up
> with a Taiwan company called "Lucky Star" as the manufacturer.  Using AGP
> card.3 pci slots, last one shared with first of 3 ISA slots.  PCI version is
> 2.10.  I know the board does share IRQs, in fact the AGP card by Creative,
> and the creative SB Live insist on sharing an IRQ despite my fiding with
> BIOS to try and force SBLive in a free IRQ.  More info below, and Thanks for
> all the help!!!!
> 
> 0 System timer
> 1 Standard 101/102-Key or Microsoft Natural Keyboard
> 2 Programmable interrupt controller
> 3 U.S. Robotics 56K FAX INT PnP
> 4 Communications Port (COM3)
> 5 3Com EtherLink III ISA (3C509b-TPO) in PnP mode
> 6 Standard Floppy Disk Controller
> 7 ECP Printer Port (LPT1)
> 8 System CMOS/real time clock
> 9 (free)
> 10 (free)
> 11 Creative SB Live! Value
> 11 IRQ Holder for PCI Steering
> 11 3D Blaster RIVA TNT2 Ultra
> 12 TrackMan4 (PS/2)
> 13 Numeric data processor
> 14 Primary IDE controller (dual fifo)
> 14 VIA Bus Master PCI IDE Controller
> 15 Secondary IDE controller (dual fifo)
> 15 VIA Bus Master PCI IDE Controller
> 
>    Plug and Play BIOS
>     System
>     Alloc resources:                None
>     Driver:                                   bios.vxd     4/23/1999 10:22
> PM Size: 30193
> 
> << System BIOS >>
>   < System BIOS >
>     Manufacturer:                         Award
>     Version:                              Award Modular BIOS v4.51PG
>     Date:                                 11/05/98
>     Plug & Play Version:                  1.00
>     ID No.:                               FC 01 00
> 
> Thnaks again!
> --
> Tom
> 
> www.amotherswork.com for custom fleece baby buntings, nursery decorations,
> bridal & First Communion veils
> "Doc" <pc-doc@mediaone.net> wrote in message
> news:3A59E6C6.3821C4F3@mediaone.net...
> > Tom,
> > What motherboard are you using? And are there ONLY three
> > PCI slots aboard?
> > Older Mobos did not support (as well) the PCI / IRQ
> > 'sharing' the is inherent in PCI 2.03... (hmm, well
> > 2.03 or 2.0x... forget which version is out now) and
> > consequently cards don't play together so nicely.
> >
> > Are you using an AGP card?  You know that if so,
> > I'd be cautious about placing 'any' card in PCI
> > slot 1!!
> > All slots kind of share with at least one other, with
> > the EXCEPTION of (in 5 PCI slots mobos) usually
> > 3 and 4... some of the later MOBOS do this even
> > better allowing you to set the preference in the
> > BIOS.
> > In 'IRQsharing' based Motherboard/BIOS systems
> > it is not unusual to see some sharing of IRQs... and
> > that is NOT a problem (ahh, unless you have ONE).
> >
> > So I'd check the date and status of your BIOS.
> > IF you are using an old board, you 'might' want
> > to change up to a new board. One that will still
> > use your CPU and RAM, but one that better handles
> > IRQ conflicts.
> >
> > Again, what Mobo? What BIOS date... and do you
> > use an AGP card?
> >
> > Tom wrote:
> > >
> > > Hi,
> > > I am trying to install a ADS Tech PCI card with 2 USB ports on Win98SE.
> I
> > > have 3 pci slots, one has SBLive Value in it.  Adding USB card screws up
> > > SBLive.  Sometimes SBLive isn't even recognized at boot, other time it
> is,
> > > but when Windows starts all you hear is static.  I have tried moving the
> > > card to different slots.  The SB Live only works at all in slot 1 or 3,
> > > never in slot 2; nothing but static from it then.  Any ideas?  Thx!
> > >
> > > --
> > > Tom
> > >
> > > www.amotherswork.com for custom fleece baby buntings, nursery
> decorations,
> > > bridal & First Communion veils
> >
> > --
> > Rich 'Doc' Colley
> >
> > mailto:pc-doc@mediaone.net

-- 
Rich 'Doc' Colley
      
mailto:pc-doc@mediaone.net