Article View: comp.sys.ibm.pc
Article #13606LIM 4.0 EMS question.
From: christopher douglas vaughan
Date: Fri, 13 Nov 1992 22:14
Date: Fri, 13 Nov 1992 22:14
19 lines
1327 bytes
1327 bytes
My Taiwan-clone EMS card purports to be LIM 4.0 compatible, and it does support non-volatile memory blocks, for example. But the driver it came with doesn't allow any specification of page frame or addresses to in-/exclude like true LIM 4.0 drivers do. If possible, I would like to take advantage of LIM 4.0's memory mapping features to use some software I found which would give me access to DOS UMB's. My question is, would a different driver allow me to do this, or is this a hardware limitation? And if another driver would work, where would I find one? Would QRAM, for example, be useful here? Or am I basically out of luck with this? Any and all replies most apppreciated. Chris Vaughan Indiana University cdvaugha@ucs.indiana.edu
Technical Details
Message-ID:
<BxoDsA.4EI@usenet.ucs.indiana.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!portal!lll-winken!fnnews.fnal.gov!mp.cs.niu.edu!ux1.cso.uiuc.edu!usenet.ucs.indiana.edu!silver.ucs.indiana.edu!cdvaughaShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!portal!lll-winken!fnnews.fnal.gov!mp.cs.niu.edu!ux1.cso.uiuc.edu!usenet.ucs.indiana.edu!silver.ucs.indiana.edu!cdvaugha From: cdvaugha@silver.ucs.indiana.edu (christopher douglas vaughan) Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware Subject: LIM 4.0 EMS question. Message-ID: <BxoDsA.4EI@usenet.ucs.indiana.edu> Date: 13 Nov 92 22:14:34 GMT Sender: news@usenet.ucs.indiana.edu (USENET News System) Distribution: usa Organization: Indiana University Lines: 19 Nntp-Posting-Host: silver.ucs.indiana.edu