Help In Redirecting A Printer Port

Article View: comp.sys.ibm.pc

Article #13694

#13694

From: Steve Carr
Date: Tue, 19 Mar 1991 08:44

15 lines
1340 bytes

FSC-Control: EID:1ad9 1673a580
FSC-Control: PID: RA 1 0534
FSC-Control: MSGID: 3:770/115 4d8515b0
The alternative approach is to replace the printer BIOS chip - there is an 
IBM Graphics printer compatible version of the firmware that supports not 
only the IBM line draw character set but also supports the graphics command 
set.  I have such a chip but you should be able to find one nearer (this is 
the South Pacific and a few thousand miles away...).  I upgraded my ols 
Microline 92 the same way.  You could find someone with the 'IBM Plug'n'play'
chipset and copy it.  
 
---
 * Origin: RemoteAccess (64-3-3478094) Christchurch,New Zealand (3:770/115.0)
SEEN-BY: 770/101 110 115 605 771/110 150 160 170 180 772/20 200 774/10 
FSC-Control: PATH: 770/115 110 101 772/20 771/110

Technical Details

Message-ID: <9103200945.AA63626@f170.n771.z3.fidonet.org>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!emory!wuarchive!waikato.ac.nz!comp.vuw.ac.nz!actrix!fnet!Steve_Carr

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!emory!wuarchive!waikato.ac.nz!comp.vuw.ac.nz!actrix!fnet!Steve_Carr
From: Steve_Carr@f170.n771.z3.fidonet.org (Steve Carr)
Newsgroups: comp.sys.ibm.pc
Subject: Help In Redirecting A Printer Port
Message-ID: <9103200945.AA63626@f170.n771.z3.fidonet.org>
Date: 19 Mar 91 08:44:00 GMT
Reply-To: Steve_Carr@f115.n770.z3.fidonet.org (Steve Carr)
Lines: 15
Comment-To: Bob_Miorelli@f115.n770.z3.fidonet.org (Bob Miorelli)