🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc
Article #13940

Re: Replacing an 8250 with a 16550a chip

#13940
From: Mark Lord
Date: Tue, 23 Apr 1991 13:21
15 lines
1340 bytes
In article <1991Apr20.103614.1295@agora.rain.com> tedm@agora.rain.com (Ted Mittelstaedt) writes:
<I was looking over the data sheets for the 16550a Uart, and I noticed that
<there is a DIP version of the chip as well as the more common square chicklet
<packaging.
<  Does anyone know if the pin-out on this chip is the same as the pinout of
<  the older 8250 chip?
<I have a serial card that uses an 8250 and I would like to use the 16550a 
<so when I run DeskView the serial chip isin't chewing up all the processor
<time.  has anyone plugged the 16550a into a 8250 socket on a serial card?

There are a couple of pins with slightly different functions.  On my own card,
these pins were not actually connected to anything.  This allowed me to do 
exactly as you ask.. pull out the 8250 and replace with with a 16550a.

Nice chip!
Technical Details
Message-ID: <6549@bwdls58.bnr.ca>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bwdls58!mlord
References: <1991Apr20.103614.1295@agora.rain.com>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bwdls58!mlord
From: mlord@bwdls58.bnr.ca (Mark Lord)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Replacing an 8250 with a 16550a chip
Keywords: RS-232 Breakfast Cereal Communications
Message-ID: <6549@bwdls58.bnr.ca>
Date: 23 Apr 91 13:21:01 GMT
References: <1991Apr20.103614.1295@agora.rain.com>
Sender: mlord@bwdls58.bnr.ca
Reply-To: mlord@bwdls58.bnr.ca (Mark Lord)
Distribution: na
Organization: Bell-Northern Research, Ottawa, Canada
Lines: 15