loading hi with Desqview

Article View: comp.sys.ibm.pc

Article #13973

#13973

From: Kenneth Panton
Date: Tue, 30 Apr 1991 22:07

7 lines
987 bytes

Loading small resident programs between 640 - 1meg is a problem, or perhaps it's
something totally different, but, my internal clock was thrown off kilter, QAPlus
wouldn't run, and various other symptoms occurred when I had Desqview 386 installed in some fashion on my 386 clone with 4 meg RAM. 

Is there a secret to allocating hi memory for desqview use? So far, due entirely to these installation hassles, I'm not using Desqview, nor am I using my extended/expanded (whatever) memory.  

Can someone recommend a good book as a reference for installing/using Desqview?

Technical Details

Message-ID: <6654@bwdls58.bnr.ca>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bwdls58!bcarh594!panton

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bwdls58!bcarh594!panton
From: panton@bcarh594.bnr.ca (Kenneth Panton)
Newsgroups: comp.sys.ibm.pc
Subject: loading hi with Desqview
Keywords: Desqview
Message-ID: <6654@bwdls58.bnr.ca>
Date: 30 Apr 91 22:07:17 GMT
Sender: news@bwdls58.bnr.ca
Reply-To: panton@bcarh594.bnr.ca (Kenneth Panton)
Distribution: comp
Organization: Bell-Northern Research Ltd.
Lines: 7