Is there some way to use Appltalk card with QEMM and Windows 3.0?

Article View: comp.sys.ibm.pc

Article #14009

#14009

From: Keith Kelly
Date: Mon, 06 May 1991 23:55

17 lines
1347 bytes

We are trying to use the Apple LocalTalk PC card on a Compaq 386 using the
QEMM V5.1 memory manager and Windows 3.0 but are having difficulties in
loading the appletalk device drivers in conventional memory while other
device drivers are loaded into high memory.  The Appleshare PC manual
mentions a MEM keyword in the Link Driver section but it is unclear if this
is necessary for this application to work.

We also tried another memory manager called Netroom Version 1.12 using 
similar techniques but when we tried to run Windows we got a "protected mode"
error.

Any assistance in this matter would be appreciated.  Thanks in advance.

--
Keith Kelly                    Internet   : kelly@ipla01.hac.com         
"Of all the things I've lost   UUCP       : ...!usc!!hacgate!ipla01!kelly
 I miss my mind the most"      Phone      : (818) 702-2328

Technical Details

Message-ID: <14727@hacgate.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!hacgate!kelly@ipla01.hac.com

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!hacgate!kelly@ipla01.hac.com
From: kelly@ipla01.hac.com (Keith Kelly)
Newsgroups: comp.sys.ibm.pc
Subject: Is there some way to use Appltalk card with QEMM and Windows 3.0?
Message-ID: <14727@hacgate.UUCP>
Date: 6 May 91 23:55:51 GMT
Sender: news@hacgate.UUCP
Distribution: usa
Organization: Hughes Aircraft Company - Canoga Park, CA
              Imaging Guidance Design Laboratory
Lines: 17