Article View: comp.sys.ibm.pc
Article #14059Re: What 486motherboards work with Buslogic 542B SCSI
From: Michael Squires
Date: Fri, 01 Jan 1993 16:57
Date: Fri, 01 Jan 1993 16:57
21 lines
1413 bytes
1413 bytes
In article <926@gdx.UUCP> jay@gdx.UUCP (Jay Snyder) writes: > > >When I use it under SCO Xenix (2.3.2GT + UFN + xnx339), everything >works fine until I load X (Roell's -- ported by Per Linquist). Then >it crashes within minutes. > >This is also the case with non-GT Xenix on the same board (which is >non-scsi, and in theory, shouldn't even try to access the board). This suggests that you have memory problems, caused either by marginal SIMMs or a motherboard with ringing/noise on the memory bus. In either case only substitution will find the problem if this is true. I've never found a diagnostic package that would test things as well as just booting and installing SCO UNIX. -- Mike Squires (mikes@iuvax.cs.indiana.edu) 812 855 3974 (w) 812 333 6564 (h) mikes@iuvax.cs.indiana.edu 546 N Park Ridge Rd., Bloomington, IN 47408
Technical Details
Message-ID:
<1993Jan1.115712.1440@news.cs.indiana.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sdd.hp.com!spool.mu.edu!umn.edu!gaia.ucs.orst.edu!news.cs.indiana.edu!mikes@moose.cs.indiana.eduReferences:
<926@gdx.UUCP>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.hardware,comp.unix.xenix.sco Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sdd.hp.com!spool.mu.edu!umn.edu!gaia.ucs.orst.edu!news.cs.indiana.edu!mikes@moose.cs.indiana.edu From: "Michael Squires" <mikes@moose.cs.indiana.edu> Subject: Re: What 486motherboards work with Buslogic 542B SCSI Message-ID: <1993Jan1.115712.1440@news.cs.indiana.edu> Summary: look at your memory, also Organization: Indiana University, Bloomington References: <926@gdx.UUCP> Date: Fri, 1 Jan 1993 11:57:06 -0500 Lines: 21