🚀 go-pugleaf

pjh@mccc.edu (Pete Holsberg) writes:

>In article <1993Jan2.003109.25202@kd4dts.dixie.com> jcw@kd4dts.dixie.com (John C. Wren) writes:
>=Does anyone out here in netland know of a device that would let me connect
>=my laptop (with no expansion slots, but with a parallel port) to the SCSI
>=chain on my '486 so that I can treat the 120mb drive on the laptop as a
>=disk drive on the '486?
>=
>=What I want to accomplish is being able to backup the laptop drive to the
>=tape system on my '486.  It would also be useful for installing software
>=from the CD ROM drive on the '486 onto the laptop.  
>=
>=Any information would be appreciated.

>Don't know if this will work, but you might contact the folks at
>Trantor. They have a parallel-to-SCSI adaptor that works quite well.
>	Trantor Systems, Ltd.
>	5415 Randall Place
>	Fremont CA 94538-3151

As was remarked, and as is consistent with the SECOND stated purpose
above, this would probably let the laptop access the tape drive on the
SCSI chain, although you probably need to turn the 486 off or the
SCSI-Ids would conflict.

The FIRST stated purpose above, to allow the 486 to access the
laptop's drive directly, probably CANNOT be achieved this way,
however, oak.oakland.edu:/pub/msdos/lan/unet11.zip is a program which uses
a parallel port connection to permit one PC access to the drives and
printers on the other PC, and should permit the laptop (configured as
the Workstation) to access the drives on the 486 (configured as the
Server).
akland


-- 
            V              
+-----------------------+  Wolf N. Paul, Computer Center         wnp@rcvie.co.at
|  A  L  C  A  T  E  L  |  Alcatel Austria Informatics      +43-1-391621-122 (w)
+-----------------------+  Ruthnergasse 1-7                   +43-1-391452 (fax)
       INFORMATICS         A-1210 Vienna-Austria/Europe        +43-1-2246913 (h)