🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc
Article #14391

Re: NEED CPM UNDER MS-DOS INFO

#14391
From: Kees Huyser
Date: Mon, 10 Nov 1986 22:25
57 lines
3170 bytes
In article <417@PSUECLA> m3h@psuecla.BITNET writes:
>
>Not too long ago someone posted an article about public domain software
>which would run CPM under MS-DOS. Can someone either; (a) point me to the
>person who posted this article (b) point me to the CPM program. Any help
>would be greatly appreciated.
>
>                          thanx in advance,
>
>                                                m3h@psuec

Maybe there is more than one program which will do the trick, but the
only one I am familiar with is _NECV2080.COM_. This nifty little
program only works with a NECV20 processor installed, but will run
virtually any software developed under CP/M. To get the CP/M software
running you have to rename every CP/M program to <filespec>.CPM.

The program is either shareware of PD (I'll have to look it up) and is
available on most FIDO bulletin boards, since it was included in a FIDO
utilities release. Ask the Sysop of the nearest Fido BBS; he should
have it.

If you have no access to a Fido BBS, mail me and I will send you the
program if it is PD or ShareWare (still have to look it up...)

BTW, the NECV20 processor is fully compatible with the original processor
but does some things faster; so it won't hurt to get one!

					Kees Huyser


+-----------------------------------------------------------------+
|  Kees Huyser							  |
|  Nationaal Instituut voor Kern Fysica en Hoge Energie Fysica    |
|  National Institute for Nuclear and High Energy Physics         |
|  PO Box 4395                                                    |
|  1009 AJ  Amsterdam, The Netherlands                            |
|								  |
|  UUCP : keeshu@nikhefk.UUCP                                     |
|         {[wherever]!seismo}!mcvax!keeshu@nikhefk.UUCP           |
|								  |
|  IF YOU BELIEVE DISCLAIMERS, YOU'LL BELIEVE ANYTHING!           |
+-----------------------------------------------------------------+

+-----------------------------------------------------------------+
|  Kees Huyser							  |
|  Nationaal Instituut voor Kern Fysica en Hoge Energie Fysica    |
|  National Institute for Nuclear and High Energy Physics         |
|  PO Box 4395                                                    |
|  1009 AJ  Amsterdam, The Netherlands                            |
|								  |
|  UUCP : keeshu@nikhefk.UUCP                                     |
|         {[wherever]!seismo}!mcvax!keeshu@nikhefk.UUCP           |
|								  |
|  IF YOU BELIEVE DISCLAIMERS, YOU'LL BELIEVE ANYTHING!           |
+-----------------------------------------------------------------+
Technical Details
Message-ID: <51@nikhefk.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!mcvax!nikhefk!keeshu
References: <417@PSUECLA>

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!mcvax!nikhefk!keeshu
From: keeshu@nikhefk.uucp (Kees Huyser)
Newsgroups: comp.sys.ibm.pc
Subject: Re: NEED CPM UNDER MS-DOS INFO
Message-ID: <51@nikhefk.UUCP>
Date: Mon, 10-Nov-86 17:25:29 EST
Article-I.D.: nikhefk.51
Posted: Mon Nov 10 17:25:29 1986
Date-Received: Mon, 10-Nov-86 21:38:14 EST
References: <417@PSUECLA>
Reply-To: keeshu@nikhefk.uucp (Kees Huyser)
Organization: Nikhef-K CSG
Lines: 56
Apparently-To: rnews@mcvax