🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc
Article #14694

Re: Query: TeX on IBM PC-XT with TinyTurbo 286 board

#14694
From: T Anderson
Date: Mon, 08 Dec 1986 05:45
19 lines
1555 bytes
I use PC TeX (Personal TeX) on an AT&T 6300 and I am quite satisfied
with the speed.  The 8 MHz 8086 of course makes it run 2-3 times faster
than on a PC or XT.  The 80286 should run about 50-100% yet by my
experience.  The primary speed problem is printing speed and this has
little to do with the computer but depends on the speed of your printer
in graphics mode.  I highly recommend a 24 pin printer that can print
good graphics in one pass.  I use an Epson LQ1500 (the LQ800 & 1000 are
only a little slower), it runs nearly 6 times faster than an Epson
FX80 or similar 9 pin printer.  A full page prints in about 30 sec
compared to nearly 3 min on the 9-pin printers I've tested.  

I have not used micro TeX from Addison-Wesley but the reviews I've 
read have all indicated that the speeds were very close to the same.

			     --	Terry L Anderson
				AT&T Bell Laboratories -- Liberty Corners
				UUCP:     ...!ihnp4!daimler!kaiser!tla
				TeleMail: Terry.Anderson
				(201) 580-4428
Technical Details
Message-ID: <428@kaiser.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!ames!ucbcad!ucbvax!cbatt!ihnp4!kaiser!tla
References: <184@elbereth.RUTGERS.EDU>

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!ames!ucbcad!ucbvax!cbatt!ihnp4!kaiser!tla
From: tla@kaiser.UUCP (T Anderson)
Newsgroups: comp.sys.ibm.pc,comp.text
Subject: Re: Query: TeX on IBM PC-XT with TinyTurbo 286 board
Message-ID: <428@kaiser.UUCP>
Date: Mon, 8-Dec-86 00:45:14 EST
Article-I.D.: kaiser.428
Posted: Mon Dec  8 00:45:14 1986
Date-Received: Mon, 8-Dec-86 21:53:54 EST
References: <184@elbereth.RUTGERS.EDU>
Organization: AT&T Bell Laboratories, Liberty Corner
Lines: 19