Article View: comp.sys.ibm.pc
Article #14887Re: Kermit and Procomm
From: Richard Michael Todd
Date: Wed, 17 Dec 1986 22:25
Date: Wed, 17 Dec 1986 22:25
20 lines
1624 bytes
1624 bytes
In article <75800005@uiucdcsp>, vanzandt@uiucdcsp.cs.uiuc.edu writes:
>
>
> Would someone please explain (in full detail) to me how to get
> Procomm 2.4 to do Kermit transfers. I can get Xmodem to work fine, I can
> get Kermit to Kermit to work fine, I just can't get Procomm to Kermit to
> work...
>
One thing that might be fouling things up is confusion on parity. Make sure
that whatever you have the byte length, parity type, etc. set to is the
same as what the UNIX Kermit thinks it is. Typing "show" at the Unix Kermit
system prompt should show what everything's set at. Use the "set" command
to change anything Kermit seems to have set incorrectly. Then go on with
"RECEIVE", etc. and everything should work. I use Procomm regularly to
up/download to UNIX, no problems. I use a setting of 8-bit bytes, no parity,
so Kermit doesn't have to bother with 8th-bit quoting. Hope this helps.
___________________________________________________________________________
Richard Todd
USSnail:820 Annie Court,Norman OK 73069
UUCP: {allegra!cbosgd|ihnp4}!okstate!uokmax!rmtodd
Technical Details
Message-ID:
<403@uokmax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!okstate!uokmax!rmtoddReferences:
<75800005@uiucdcsp>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!okstate!uokmax!rmtodd From: rmtodd@uokmax.UUCP (Richard Michael Todd) Newsgroups: comp.sys.ibm.pc Subject: Re: Kermit and Procomm Message-ID: <403@uokmax.UUCP> Date: Wed, 17-Dec-86 17:25:21 EST Article-I.D.: uokmax.403 Posted: Wed Dec 17 17:25:21 1986 Date-Received: Thu, 18-Dec-86 05:08:38 EST References: <75800005@uiucdcsp> Organization: University of Oklahoma, Norman, OK Lines: 20 Summary: Maybe parity problem?