reading joystick from assembly

Article View: comp.sys.ibm.pc

Article #15021

#15021

From: Thomas Haviland
Date: Tue, 30 Dec 1986 20:24

18 lines
1105 bytes




   Is there anyone out there who has written software in assembly to
   read values off the PC joystick?  I've looked at the information in
   the IBM Tech-Ref, but it wasn't notably helpful.  I'm working on
   a project in assembly that needs to read the joystick values.  Any
   help on this would be appreciated.

                                    Thomas Haviland
                                    University of Vermont


-- 
	 					Thomas P. Haviland
USENET:	decvax!dartvax!uvm-gen!haviland 	University of Vermont
CSNET:	haviland%uvm@csnet-relay		(802) 656-2540

Technical Details

Message-ID: <469@uvm-gen.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!husc6!mit-eddie!genrad!decvax!dartvax!uvm-gen!haviland

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!husc6!mit-eddie!genrad!decvax!dartvax!uvm-gen!haviland
From: haviland@uvm-gen.UUCP (Thomas Haviland)
Newsgroups: comp.sys.ibm.pc
Subject: reading joystick from assembly
Message-ID: <469@uvm-gen.UUCP>
Date: Tue, 30-Dec-86 15:24:25 EST
Article-I.D.: uvm-gen.469
Posted: Tue Dec 30 15:24:25 1986
Date-Received: Thu, 1-Jan-87 03:53:34 EST
Organization: EMBA Computer Facility, Univ. of Vermont, Burlington.
Lines: 18