Using an EGA in an ATT6300

Article View: comp.sys.ibm.pc

Article #15260

#15260

From: haviland
Date: Tue, 27 Jan 1987 18:31

17 lines
1208 bytes

    Is there anyone out there with experience in using a graphics adapter
    on an AT&T 6300 other than the one that comes with it (such as an EGA
    card)?  The slots in the 6300 are supposedly IBM compatable as regards
    memory boards and such, but since AT&T developed their own graphics
    adapter, I'm not sure if you can get around it.  The adapter itself
    is not in a normal slot but seems to be off the end of the bus.

    Any comments would be greatly appreciated.

                                    Tom Haviland


-- 
	 					Thomas P. Haviland
USENET:	decvax!dartvax!uvm-gen!haviland 	University of Vermont
CSNET:	haviland%uvm@csnet-relay		(802) 656-2540

Technical Details

Message-ID: <492@uvm-gen.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!ucla-cs!sdcrdcf!hplabs!decwrl!decvax!dartvax!uvm-gen!haviland

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!ucla-cs!sdcrdcf!hplabs!decwrl!decvax!dartvax!uvm-gen!haviland
From: haviland@uvm-gen.UUCP
Newsgroups: comp.sys.ibm.pc,comp.sys.att
Subject: Using an EGA in an ATT6300
Message-ID: <492@uvm-gen.UUCP>
Date: Tue, 27-Jan-87 13:31:13 EST
Article-I.D.: uvm-gen.492
Posted: Tue Jan 27 13:31:13 1987
Date-Received: Fri, 30-Jan-87 04:34:46 EST
Organization: EMBA Computer Facility, Univ. of Vermont, Burlington.
Lines: 17