Re: Reset switch for IBM PC/AT ?

Article View: comp.sys.ibm.pc

Article #15568

#15568

From: cdl
Date: Thu, 05 Feb 1987 01:12

16 lines
1517 bytes

In article <460@ima.UUCP>, johnl@ima.UUCP (John R. Levine) writes:
> I do software development on my PC AT, which means that it hangs a lot.
> Turning it off and on is a pain, and isn't very good for the disks and
> the screen either.  It is my impression that it should be fairly easy to
> build a little circuit that when I push a button zaps the reset line inside
> the PC and restarts it as though the power had just been restored.  Please
> mail me responses; I'll summarize if there's interest.
> 
> I realize that there are various software ways to try to catch keystrokes
I have installed a reset switch on my pc-compatible. (in 1/2 hour)
There is a 8284 clock chip close to the 8088 CPU, this chip
controls the cold boot reset ie. when you power up, this chip
sends a reset pulse to everything. You can force this chip to send
a reset pulse to everything by pulling its pin #11 low. This won't
harm your system at all since you are doing the same thing when you
turn your sytem on/off.

Technical Details

Message-ID: <861@aluxs.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!princeton!allegra!ulysses!mhuxt!aluxs!cdl

References: <460@ima.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!princeton!allegra!ulysses!mhuxt!aluxs!cdl
From: cdl@aluxs.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Reset switch for IBM PC/AT ?
Message-ID: <861@aluxs.UUCP>
Date: Wed, 4-Feb-87 20:12:17 EST
Article-I.D.: aluxs.861
Posted: Wed Feb  4 20:12:17 1987
Date-Received: Sat, 7-Feb-87 12:39:20 EST
References: <460@ima.UUCP>
Distribution: na
Organization: AT&T Bell Laboratories, Murray Hill, NJ
Lines: 16

Reply to Parent Message