Opus under Desqview

Article View: comp.sys.ibm.pc

Article #25847

#25847

From: Norm Laudermilch
Date: Thu, 24 Mar 1988 01:37

19 lines
1586 bytes

     I am currently trying to run Opus v1.03b successfully under Desqview
2.01. However, every once and a while Opus just locks up. I has happened
in several different cases such as file transfers, and mostly yelling. I
have Opus in a memory partition of 300k, and Desqview is set to run Opus
in both the background and the foreground. I also load the Opus fossil
driver AFTER Desqview sets up the memory partition. 
     Is there something I am doing wrong? I have been through the manual
cover to cover several times and it hasn't been much help. I would 
appreciate any advice that may help. I am preparing to enter FidoNet but
need to perfect the Desqview environment first. 

-------------------------------------------------------------------------
   The usual disclaimer....                - Norm Laudermilch
-------------------------------------------------------------------------
                YEAR: A period of 365 dissapointments
------------------------------------------------------------------------- 
               UUCP:...decvax!sunybcs!fredonia!laud1234
-------------------------------------------------------------------------

Technical Details

Message-ID: <903@fredonia.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!bbn!rochester!ur-tut!sunybcs!fredonia!laud1234

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!bbn!rochester!ur-tut!sunybcs!fredonia!laud1234
From: laud1234@fredonia.UUCP (Norm Laudermilch)
Newsgroups: comp.sys.ibm.pc
Subject: Opus under Desqview
Message-ID: <903@fredonia.UUCP>
Date: 24 Mar 88 01:37:47 GMT
Reply-To: laud1234@fredonia.UUCP (Norm Laudermilch)
Organization: State University College, Fredonia, N.Y.
Lines: 19
Keywords: Opus says no thanks...