🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc
Article #40722

Re: Maxtor and Miniscribe drive query

#40722
From: Mark Davis
Date: Thu, 04 Jan 1990 14:47
63 lines
3199 bytes
Sorry to post, but mail bounced.

   ----- Transcript of session follows -----
421 Host sun-bb.corp.sun.com not found for mailer relay.
550 <burton@mitisft.Convergent.com>... Host unknown

In article <1342@mitisft.Convergent.COM> Phil Burton writes:
>I would like the net's help to get specs on these drives:
>
>Miniscribe 8438.  Is this an RLL or MFM drive?
RLL, see below
>
>Maxtor 2190.  Is this 1024 or 1224 cyliners?
1224, see below.
>
>Supposedly, a Maxtor 1140 is just a 2190 that has been tested to "only" 918
>cylinders.  Does anyone run an 1140 to 1024 (1224 ???) cylinders?
>
>Comments?
>
>Phil Burton

I have also heard the about Maxtor 1140 -> 2190 possibility.  I have no
first hand knowledge.

The Western Digital Bulletin Board has geometry for many drives in a
file called DRVTALL.TXT.  The number for the BBS is 714-756-8176.  Here
is what it contains for your drives:

-----------------------------------------------------------10/2/89-----------
|       CAP   = CAPACITY IN FORMATTED MEGABYTES
|       CYC   = MAXIMUM NUMBER OF CYLINDER
|       H     = NUMBER OF DATA HEADS
|       RWC   = START REDUCED WRITE CURRENT
|               IF IT'S = CYC + 1 THEN IT IS NOT USED
|       WPC   = START WRITE PRECOMP
|               IF IT'S = CYC + 1 THEN IT IS NOT USED
|       ENC   = ENCODING METHOD R=RLL, M=MFM
|       RATE  = TRANSFER RATE IN MEGABITS/SEC
|       ACCESS= AVERAGE ACCESS TIME
|       SPT   = SECTORS/TRACK X 512 bytes
|       FH    = FULL HIGH FORM FACTOR
|       HH    = HALF HIGH FORM FACTOR
|       R     = RLL (run length limited)
|       N     = NRZ (non return to zero)
|       M     = MFM (modified frequency modulation)
|       SA    = STAND ALONE
|       Z     = ZBR
------------------------------------------------------------------------------
MAXTOR         408-432-1700
------------------------------------------------------------------------------
MODEL   ST-506  MFM      CAP   CYC  H  RWC  WPC ENC  RATE ACCESS  SPT COMMENTS
XT-1140          5.25 FH  119  918 15  919  919 M    5    27 MS   17
XT-2190          5.25 FH  159 1224 15 1225 1225 M    5    29 MS   17
------------------------------------------------------------------------------
MINISCRIBE     303-651-6000
------------------------------------------------------------------------------
MODEL   AT               CAP   CYC  H  RWC  WPC ENC  RATE ACCESS  SPT COMMENTS
        ST-506  RLL
8438              3.5"    32   615  4  616  128 R    7.5  68 MS   26
------------------------------------------------------------------------------

Hope this helps - Mark (davis@cs.unc.edu or uunet!mcnc!davis)
Technical Details
Message-ID: <11331@thorin.cs.unc.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mcnc!thorin!clocs!davis
References: <1342@mitisft.Convergent.COM>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mcnc!thorin!clocs!davis
From: davis@clocs.cs.unc.edu (Mark Davis)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Maxtor and Miniscribe drive query
Summary: Yes RLL, 1224
Keywords: specs needed  1024 or 1224 on XT 2190
Message-ID: <11331@thorin.cs.unc.edu>
Date: 4 Jan 90 14:47:35 GMT
References: <1342@mitisft.Convergent.COM>
Sender: news@thorin.cs.unc.edu
Reply-To: davis@clocs.cs.unc.edu (Mark Davis)
Organization: University Of North Carolina, Chapel Hill
Lines: 63