Article View: comp.sys.ibm.pc
Article #41102Procomm 2.4.2 & dumb modem
From: r.l.neal
Date: Tue, 09 Jan 1990 16:15
Date: Tue, 09 Jan 1990 16:15
22 lines
1153 bytes
1153 bytes
I am using Procomm 2.4.2 with a dumb modem (212a modem) on a PC6300 (XT compatible). I can make outgoing calls fine, manually dialing, of course, but when I put it in the answer mode, with Procomm in host mode, it does not work properly. The incomming call get the appropriate tone, but the computer does not connect and go on line. (I did get it to work once, but not before or since.) I would like to transfer files between 2 pc's at different locations. Will Procomm only work in the host mode if it is using Hayes compatible modems? or is something else the problem? Thanks in advance for any help you might be able to provide. <standard disclaimer here> Bob Neal @ att!ihlpe!rlneal Naperville, Ill voice mail: 708/979-1090
Technical Details
Message-ID:
<12540@cbnewsd.ATT.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!att!cbnewsd!rlnealShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!att!cbnewsd!rlneal From: rlneal@cbnewsd.ATT.COM (r.l.neal) Newsgroups: comp.sys.ibm.pc Subject: Procomm 2.4.2 & dumb modem Keywords: modem will not answer Message-ID: <12540@cbnewsd.ATT.COM> Date: 9 Jan 90 16:15:14 GMT Distribution: usa Organization: AT&T Bell Laboratories Lines: 22