🚀 go-pugleaf

Apologies for posting rather than e-mailing. I've included the entire file
that came back to me when I tried to 'R'eply to you directly.

****************************** CUT HERE *************************************
From ncr-sd!ncrlnk!relay.cs.net!tut.fi!MAILER-DAEMON Wed Jan 10 03:55 pdt 1990
Received: from relay.cs.net by ncrlnk.Dayton.NCR.COM
          ; Wed, 10 Jan 90 06:42:32 -0500
Received: from [128.214.1.2] by RELAY.CS.NET id aa26200; 9 Jan 90 22:29 EST
Received: by tut.fi; id AB14303; Wed, 10 Jan 90 05:29:34 +0200 
Date: Wed, 10 Jan 90 05:29:34 +0200
From: Mail Delivery Subsystem <MAILER-DAEMON@tut.fi>
Subject: Returned mail: Service unavailable
Message-Id: <9001100329.AB14303@tut.fi>
To: dougm@palomar.sandiego.ncr.com
MMDF-Warning:  Parse error in original version of preceding line at RELAY.CS.NET

   ----- Transcript of session follows -----
Connected to [128.214.1.1]:
>>> RCPT To:<huopio@kannel>
<<< 554 <huopio@kannel>... Host kannel not known
554 <kannel!huopio@tut.uucp>... Service unavailable

   ----- Unsent message follows -----
Received: from mcsun.EU.net ([192.16.202.1]) by tut.fi; id AA14301; Wed, 10 Jan 90 05:29:34 +0200 
Received: by mcsun.EU.net via EUnet; Wed, 10 Jan 90 04:29:27 +0100 (MET)
Received: from cs.utexas.edu by uunet.uu.net (5.61/1.14) with UUCP 
	id AA22639; Tue, 9 Jan 90 22:25:59 -0500
Posted-Date: Tue, 9 Jan 90 19:05:14 pst
Received: from swrinde.nde.swri.edu by cs.utexas.edu (5.59/1.46)
	id AA23850; Tue, 9 Jan 90 21:21:36 CST
Received: from ucsd.edu by swrinde.nde.swri.edu (5.61/1.34)
	id AA12684; Tue, 9 Jan 90 21:21:30 -0600
Received: from ucsdhub.UUCP by ucsd.edu; id AA24207
	sendmail 5.61/UCSD-2.0-sun via UUCP
	Tue, 9 Jan 90 19:21:21 -0800 for cs.utexas.edu!uunet!mcsun!sunic!tut!kannel!huopio@swrinde.nde.swri.edu
Received: by hp-sdd.sdd.hp.com; Tue, 9 Jan 90 19:05:14 pst
Date: Tue, 9 Jan 90 19:05:14 pst
From: dougm@palomar.SanDiego.NCR.COM
Message-Id: <9001100305.AA22625@hp-sdd.sdd.hp.com>
Received: from ncr-sd with uucp; Tue, 9 Jan 90 18:53 PST
To: kannel!huopio@tut.uucp
Subject: Re: HELP! Mitsubishi HD dead ?!?
Newsgroups: comp.sys.ibm.pc
In-Reply-To: <HUOPIO.90Jan9224649@kannel.lut.fi>
Organization: NCR Corporation, Rancho Bernardo, CA
Cc: 

In article <HUOPIO.90Jan9224649@kannel.lut.fi> you write:
>Mu friend bought a BEAR 386 with a Mitsinbishi MR535-U00 drive and
>DTC RLL 1:1 controller..
>
>Now: Are these settings right for the drive?
>
>Cylinders 980 Heads 5 Precomp 0 Landing zone 981 Sect/trk 26
>

I don't think so. I have the same drive and the CMOS BIOS reports that I have
it defined as having 977 cylinders, 5 heads, Precomp 300, Landing zone 978 and
17 sectors per track. I did not low level format the drive myself. It was 
done by the technician where I bought it. I also have the same controller as
your friend. I'm running my controller/drive in a 12MHz '286. I am also using
RLL 1:1 as is your friend. Hope this helps.

Cheers!
  -- Doug


-- 
----
Doug Marshall   <Doug.Marshall@SanDiego.NCR.COM>  * My humble opinions and
+1 619 485 3494 <...!ncr-sd!palomar!dougm>        * and ideas are just that.
"All of us is smarter than each of us!" 

----
Doug Marshall   <Doug.Marshall@SanDiego.NCR.COM>  * My humble opinions and
+1 619 485 3494 <...!ncr-sd!palomar!dougm>        * and ideas are just that.
"All of us is smarter than each of us!"