🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.ibm.pc
Article #41526

Re: Need V20 CPU chip

#41526
From: Fred Smith
Date: Sat, 03 Feb 1990 02:33
15 lines
1095 bytes
In article <1499@east.East.Sun.COM> jimv@hienergy.East.Sun.COM (Jim Vienneau  - Sun BOS Cust Serv) writes:
>I have this bizarre application that will only run on a PC with a V20
>CPU installed. Anybody have one (any speed) kicking around that they
>don't need? I'm sure we can work something out if you do.
>


A NEC V20 is really inexpensive--no need to finagle. I bought a 10Mhz
part from JDR Microdevices a year and a half ago for $12.95. Last time I
noticed they were selling them for a buck or two less than that. Not a 
problem, as their minimum purchase is (was then) a measly ten bucks.

If you need a 5 or 8 Mhz part they are even more inexpensive (less expensive??)

Fred
Technical Details
Message-ID: <8339@cg-atla.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!cg-atla!fredex
References: <1499@east.East.Sun.COM>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!cg-atla!fredex
From: fredex@cg-atla.UUCP (Fred Smith)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Need V20 CPU chip
Message-ID: <8339@cg-atla.UUCP>
Date: 3 Feb 90 02:33:28 GMT
References: <1499@east.East.Sun.COM>
Reply-To: fredex@cg-atla.UUCP (Fred Smith)
Distribution: na
Organization: Agfa Compugraphic Division
Lines: 15