Article View: comp.sys.ibm.pc
Article #41711Seagate ST-02 SCSI Host Adapter Questions
From: Timothy Sipples
Date: Mon, 05 Feb 1990 23:01
Date: Mon, 05 Feb 1990 23:01
12 lines
1213 bytes
1213 bytes
I was wondering if anybody could help with the following questions/
problems re: the Seagate ST-02 SCSI host adapter:
(1) Fastback Plus seems to flinch. I can only use "Low DMA
speed" with the ST-02, where previously I could use "High." Why?
(2) IAU19 does not work. Does anyone know of an interleave
adjustment utility which works with the ST-02/SCSI?
(3) The ST-02 has a jumper for enabling interrupts (either IRQ
3 or IRQ 5). The manual advises keeping interrupts disabled. What
does this jumper do? Why does it exist?
Any other tips are most welcome. I will post a summary of
responses if interest warrants, so please reply via net mail.
Timothy F. Sipples sipples@husc8.{harvard.edu|bitnet}
Technical Details
Message-ID:
<1501@husc6.harvard.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!apple!snorkelwacker!husc6!husc8!sipplesShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!apple!snorkelwacker!husc6!husc8!sipples From: sipples@husc8.HARVARD.EDU (Timothy Sipples) Newsgroups: comp.sys.ibm.pc Subject: Seagate ST-02 SCSI Host Adapter Questions Message-ID: <1501@husc6.harvard.edu> Date: 5 Feb 90 23:01:40 GMT Sender: news@husc6.harvard.edu Reply-To: sipples@husc8.UUCP (Timothy Sipples) Organization: Harvard University Science Center Cambridge, MA Lines: 12