Article View: comp.sys.ibm.pc
Article #41734Re: Help, PC starts too slow
From: Ted Cantrall
Date: Mon, 05 Feb 1990 15:33
Date: Mon, 05 Feb 1990 15:33
14 lines
1182 bytes
1182 bytes
In article <1625@lakesys.lakesys.com> cperry@lakesys.UUCP (Christopher Perry) writes: > >My 12 mhz AT 80286 clone is supposed to start at 6 mhz. Instead when >I turn it on often it starts at 1.3 mhz. Then I turn it off and >turn it back on about 30 seconds later at it starts at the >correct 6 mhz We have had 1Mz xtals that would occationally start a .1Mz. The remedy is to replace the beasty. -ted- ------------------------------------------------------------------------------- ted@helios.ucsc.edu | "The opinions are mine... (408)459-2110 | ...the facts are public domain." -------------------------------------------------------------------------------
Technical Details
Message-ID:
<10644@saturn.ucsc.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!purdue!decwrl!shelby!agate!saturn!helios!tedReferences:
<1625@lakesys.lakesys.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!purdue!decwrl!shelby!agate!saturn!helios!ted From: ted@helios.ucsc.edu (Ted Cantrall) Newsgroups: comp.sys.ibm.pc Subject: Re: Help, PC starts too slow Message-ID: <10644@saturn.ucsc.edu> Date: 5 Feb 90 15:33:29 GMT References: <1625@lakesys.lakesys.com> Sender: usenet@saturn.ucsc.edu Reply-To: ted@helios.ucsc.edu (Ted Cantrall) Organization: UCO/Lick Observatory, Santa Cruz Lines: 14