Need help with overriding carrier detect in modem

Article View: comp.sys.ibm.pc

Article #41797

#41797

From: Randy Nelson VE3WRN
Date: Wed, 07 Feb 1990 05:23

20 lines
1372 bytes

	I have a Compaq SLT/286 laptop with an internal modem.  I am
trying to use a program called MTE as the comm program.  When 
trying to dial a number in the dialing directory, I get a 
message that either the modem is online or the carrier detect is
being overridden.  The manual is simply an installation guide and
doesn't contain the command set for the modem.      
	I would appreciate it if someone would send me a list of the Hayes
compatible command set or the command that will enable the carrier detect
to work.  I also get a message from Telix when I do an ALT-H that the
hangup was unsuccessful. Can this be related to the same problem?
	Please e-mail me at the following address if you can help.

Thanks,
Randy
--
Randy Nelson VE3WRN  Ontario Representative      rnelson@watserv1.uwaterloo.edu
197A Cedarvale Cr.   Disability Information     ..uunet!watmath!watserv1!rnelson
WATERLOO, Ont.       Services of Canada.         rnelson@uncaedu.bitnet
N2L 4T3              (519)884-2989 (Voice and TDD)

Technical Details

Message-ID: <1013@watserv1.waterloo.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!rnelson

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!rnelson
From: rnelson@watserv1.waterloo.edu (Randy Nelson VE3WRN)
Newsgroups: comp.sys.ibm.pc,comp.dcom.modems
Subject: Need help with overriding carrier detect in modem
Message-ID: <1013@watserv1.waterloo.edu>
Date: 7 Feb 90 05:23:24 GMT
Distribution: comp
Organization: U of Waterloo, Ontario
Lines: 20