Article View: comp.sys.ibm.pc
Article #42182Re: CLIPPER OVERLAY HELP
From: Stephen M. Dunn
Date: Mon, 12 Feb 1990 01:59
Date: Mon, 12 Feb 1990 01:59
14 lines
1289 bytes
1289 bytes
In article <90021007304075@masnet.uucp> daniel.comeau@canremote.uucp (DANIEL COMEAU) writes:
$SA>Is there any way to use the MS-DOS linker instead of plink86?
$Yes, if you don't required overlays. Many small applications don't
$need overlays. The MS-DOS Linker is considerably faster than PLINK86.
And if you have Turbo C 1.0, you can use TLINK and it's several
times faster again than the DOS linker. I've found that TLINK V2.0
doesn't work reliably with Clipper, but V1.0 does.
--
Stephen M. Dunn cs4g6ag@maccs.dcss.mcmaster.ca
<std_disclaimer.h> = "\nI'm only an undergraduate!!!\n";
****************************************************************************
I Think I'm Going Bald - Caress of Steel, Rush
Technical Details
Message-ID:
<25D6188E.29515@maccs.dcss.mcmaster.ca>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!jarvis.csri.toronto.edu!torsqnt!lethe!geac!maccs!cs4g6agReferences:
<90021007304075@masnet.uucp>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!jarvis.csri.toronto.edu!torsqnt!lethe!geac!maccs!cs4g6ag From: cs4g6ag@maccs.dcss.mcmaster.ca (Stephen M. Dunn) Newsgroups: comp.sys.ibm.pc Subject: Re: CLIPPER OVERLAY HELP Message-ID: <25D6188E.29515@maccs.dcss.mcmaster.ca> Date: 12 Feb 90 01:59:42 GMT References: <90021007304075@masnet.uucp> Reply-To: cs4g6ag@maccs.dcss.mcmaster.ca (Stephen M. Dunn) Organization: McMaster University, Hamilton, Ontario Lines: 14