Re: Steve Gibson's 386sx column

Article View: comp.sys.ibm.pc

Article #42411

#42411

From: Jason Merrill
Date: Thu, 15 Feb 1990 08:13

19 lines
1494 bytes

In article <40970047@hpindda.HP.COM> huilin@hpindda.HP.COM (Hui-Lin Lim) writes:
>/ jmerrill@jarthur.Claremont.EDU (Jason Merrill) /  9:30 pm  Feb 13, 1990 /
>>My computer uses the AMI BIOS, and it also only needs F800-FFFF after
>>bootup; I have QEMM-386 using E800-F7FF for the EMS page frame.
>
>Is the BIOS at f000-f800 automatically disabled so that it
>doesn't appear in the memory map or does it have to be manually
>disabled?  If the latter case, how is this done?

It has to be manually disabled on my computer; on my device=qemm.sys line, I
have the parameter I=E000-F7FF (include).  E000-EFFF is the on-board EGA
bios...not really something I need.  If you have QEMM 5.0, the Analyze
function will tell you what parts of ROM can be manually included -- but you
have to run just about every program you own to make sure you don't mess
anything up -- there is one 4K block which, as far as I can tell, is only
used by Norton Disk Doctor (if I include it, NDD locks immediately)...

--
Jason Merrill				jmerrill@jarthur.claremont.edu

Technical Details

Message-ID: <4416@jarthur.Claremont.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!jarthur!jmerrill

References: <29140@amdcad.AMD.COM> <40970047@hpindda.HP.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!jarthur!jmerrill
From: jmerrill@jarthur.Claremont.EDU (Jason Merrill)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Steve Gibson's 386sx column
Message-ID: <4416@jarthur.Claremont.EDU>
Date: 15 Feb 90 08:13:57 GMT
References: <29140@amdcad.AMD.COM> <40970047@hpindda.HP.COM>
Organization: Harvey Mudd College, Claremont, CA 91711
Lines: 19

Reply to Parent Message