Re: PS/2 formatting woes

Article View: comp.sys.ibm.pc

Article #42539

#42539

From: Scott Gray
Date: Fri, 16 Feb 1990 23:45

16 lines
1295 bytes

Yes, I have had the same trouble with my 3.5" DSHD disks on my PS/2 30-286.
After using the disks for a while the disks suddenly stop working, and when I 
try to reformat them I get a "Track 0 bad - disk unusable" or somethine along
those lines.

I have heard rumor that IBM's 3.5 drives have been having this problem ever
since they were introduced, but I don't have anything to substantiate that
claim.

Also, I am usually very good with my disks, keep them away from dust, heat,
excessive cold, magnets, phones, etc. so I don't think that the problem 
is happening because I mistreat them.

If anyone hears anything about this problem please post the info.

------------------------ Scott Gray ------------------------------

Technical Details

Message-ID: <11361@nigel.udel.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!mephisto!udel!toffee!gray

References: <3980@rouge.usl.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!mephisto!udel!toffee!gray
From: gray@toffee.it.udel.edu (Scott Gray)
Newsgroups: comp.sys.ibm.pc
Subject: Re: PS/2 formatting woes
Summary: Oh woe is me.
Message-ID: <11361@nigel.udel.EDU>
Date: 16 Feb 90 23:45:10 GMT
References: <3980@rouge.usl.edu>
Sender: usenet@udel.EDU
Reply-To: gray@freezer.it.udel.edu (Scott Gray)
Distribution: usa
Organization: University of Delaware -- 040 Smith Sun Lab
Lines: 16

Reply to Parent Message