Article View: comp.sys.ibm.pc
Article #42593Re: Basic questions about Ventura
From: Jonathan Lavigne
Date: Sat, 17 Feb 1990 23:51
Date: Sat, 17 Feb 1990 23:51
16 lines
1224 bytes
1224 bytes
In article <431@adiron.UUCP>, frank@adiron.UUCP (Corradino) writes: > . . Version 2.0 [of Ventura Publisher] purports support of >extended memory, but we haven't figured it out yet. Actually, Ventura doesn't support EXTENDED memory at all, but only LIM 4.0 EXPANDED memory. A lot's been written about the differences between the two, but I've forgotten it all. All I know is that it took about 2 minutes to set up the extra memory on my AST 386 as expanded memory. The base version of Ventura 2.0, which I have, uses a relatively small amount of this memory for program code (a little over 100K, according to the documentation). The Professional Extension can use as much as you have, and can use it for your document. Jonathan Lavigne BL.JPL@RLG.STANFORD.EDU Research Libraries Group Stanford University
Technical Details
Message-ID:
<8109@lindy.Stanford.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!dogie.macc.wisc.edu!decwrl!shelby!lindy!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!dogie.macc.wisc.edu!decwrl!shelby!lindy!news From: BL.JPL@forsythe.stanford.edu (Jonathan Lavigne) Newsgroups: comp.sys.ibm.pc Subject: Re: Basic questions about Ventura Message-ID: <8109@lindy.Stanford.EDU> Date: 17 Feb 90 23:51:44 GMT Sender: news@lindy.Stanford.EDU (News Service) Distribution: usa Lines: 16