Article View: comp.sys.ibm.pc
Article #42602Pioneer Vantage 386SX memory problem
From: Michael K. Minakami
Date: Sun, 18 Feb 1990 02:17
Date: Sun, 18 Feb 1990 02:17
12 lines
1033 bytes
1033 bytes
I just bought two 1MB simms hoping to add them to the two already installed on my motherboard, only to find that they are being completely ignored. I know the simms are good (if I swap the two new ones with the two old ones the system works just fine). I also have 2MB of 2ws memory installed on an expansion board which works fine (starting address =2048, which was changed to 4096 when the additional simms were installed. With the additional simms evertything above 2MB was ignored). Does anyone know what's wrong? Thanks in advance, Michael
Technical Details
Message-ID:
<1990Feb18.021704.1742@Neon.Stanford.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!mintaka!ogicse!decwrl!shelby!neon!Neon.Stanford.EDU!minakamiShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!mintaka!ogicse!decwrl!shelby!neon!Neon.Stanford.EDU!minakami From: minakami@Neon.Stanford.EDU (Michael K. Minakami) Newsgroups: comp.sys.ibm.pc Subject: Pioneer Vantage 386SX memory problem Message-ID: <1990Feb18.021704.1742@Neon.Stanford.EDU> Date: 18 Feb 90 02:17:04 GMT Sender: minakami@Neon.Stanford.EDU (Michael K. Minakami) Organization: Computer Science Department, Stanford University Lines: 12