Re: Desqview and SVGA

Article View: comp.sys.ibm.pc

Article #42671

#42671

From: Jason Merrill
Date: Mon, 19 Feb 1990 22:12

9 lines
1032 bytes

In article <2213@bnr-rsc.UUCP> mlord@bnr-rsc.UUCP (Mark Lord) writes:
>Many (most/all?) SVGA modes actually make use of addresses in the range
>you have given away to QEMM.  The documentation for my paradise card 
>explicitly states that A0000-C7FFF is used by the card in one mode or another.

I have given QEMM permission to grab the mono display area on my board and
have had no problems, except when trying to run Mah Johngg VGA (which
assumes you have both VGA color and Hercules mono installed).  I use
640x400x256 mode regularly...

Technical Details

Message-ID: <4496@jarthur.Claremont.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!bridge2!jarthur!jmerrill

References: <29189@amdcad.AMD.COM> <4437@jarthur.Claremont.EDU> <9261@portia.Stanford.EDU> <2213@bnr-rsc.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!bridge2!jarthur!jmerrill
From: jmerrill@jarthur.Claremont.EDU (Jason Merrill)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Desqview and SVGA
Message-ID: <4496@jarthur.Claremont.EDU>
Date: 19 Feb 90 22:12:07 GMT
References: <29189@amdcad.AMD.COM> <4437@jarthur.Claremont.EDU> <9261@portia.Stanford.EDU> <2213@bnr-rsc.UUCP>
Organization: Harvey Mudd College, Claremont, CA 91711
Lines: 9

Reply to Parent Message