Article View: comp.sys.ibm.pc
Article #42764Re: Problems exitint Procomm Plus
From: C.M. Stuntz
Date: Sun, 18 Feb 1990 19:37
Date: Sun, 18 Feb 1990 19:37
29 lines
1559 bytes
1559 bytes
In article <16207@oregon.uoregon.edu> MICHELBI@oregon.uoregon.edu (Michel Biedermann) writes:
>Why does Procomm Plus (test drive version) ask me if I want to hang up the
>line when I exit. This happens even when I am not logged on to any thing.
>
>Any help would be appreciated.
>
>Thanks
>
>Michel Biedermann michelbi@oregon.uoregon.edu
>U. of Oregon
you need to tell your modem to turn on
the data carrier detect line _only then the data carrier is detected .
on my modem ( an ATI 2400etc/i ) , this can be done by putting the
command :
&C1
in the modem init string ( available in Procomm's setup menus ) . note
that unlike some programs , you need to exit and re - enter Procomm for
the new init string to be effective .
-a.stranger
--
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ "Imagination keeps the shadows away - Xymox @
@~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~@
@ a.stranger - CMS2839%RITVAX.BITNET@cunyvm.cuny.edu @
Technical Details
Message-ID:
<2245@ultb.isc.rit.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!ucla-cs!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!cms2839References:
<16207@oregon.uoregon.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!ucla-cs!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!cms2839 From: cms2839@ultb.isc.rit.edu (C.M. Stuntz) Newsgroups: comp.sys.ibm.pc Subject: Re: Problems exitint Procomm Plus Message-ID: <2245@ultb.isc.rit.edu> Date: 18 Feb 90 19:37:05 GMT References: <16207@oregon.uoregon.edu> Reply-To: cms2839%ritvax.bitnet@cunyvm.cuny.edu Distribution: usa Organization: Information Systems and Computing @ RIT, Rochester, New York Lines: 29