Article View: comp.sys.ibm.pc
Article #42780Re: Is there a cheap way to add memory to an Intel InBoard?
From: Paul S. R. Chisholm
Date: Wed, 21 Feb 1990 03:58
Date: Wed, 21 Feb 1990 03:58
20 lines
1550 bytes
1550 bytes
< Krasny Oktyabr: the hunt is on, March 2, 1990 > In article <9262@portia.Stanford.EDU>, dhinds@portia.Stanford.EDU (David Hinds) writes: > A friend of mine has a clone XT with an Intel InBoard 386 card. The > card has 1MB of memory installed, which is all it can hold. Some kind > of daughterboard is available, but is very expensive. Does anyone > know if a clone memory expansion board exists, or if memory expansion > boards from any other products will work with this card? I doubt that there's a compatible daughter board. I'll bet, though, that the one megabyte of installed memory is thirty two or (if there's partity checking) thirty six 256Kbit chips. See if there's some way to put 1Mbit chips in instead; that'll give him four megabytes. (Since a 386 needs thirty two bit wide memory, you can't go half and half.) > -David Hinds, dhinds@popserver.stanford.edu Paul S. R. Chisholm, AT&T Bell Laboratories att!pegasus!psrc, psrc@pegasus.att.com, AT&T Mail !psrchisholm I'm not speaking for the company, I'm just speaking my mind.
Technical Details
Message-ID:
<4473@pegasus.ATT.COM>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!att!dptg!pegasus!psrcReferences:
<9262@portia.Stanford.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!att!dptg!pegasus!psrc From: psrc@pegasus.ATT.COM (Paul S. R. Chisholm) Newsgroups: comp.sys.ibm.pc Subject: Re: Is there a cheap way to add memory to an Intel InBoard? Summary: maybe; does it take 1M RAM chips? Keywords: Intel InBoard, memory expansion Message-ID: <4473@pegasus.ATT.COM> Date: 21 Feb 90 03:58:09 GMT References: <9262@portia.Stanford.EDU> Organization: AT&T Bell Laboratories Lines: 20