? on DOS graphics dump

Article View: comp.sys.ibm.pc

Article #42825

#42825

From: Mike McTigue
Date: Wed, 21 Feb 1990 00:11

9 lines
892 bytes

I've got a 286 Vectra that I would like to be able to dump the VGA
graphics to a Epson (86) capatable printer. The printer (panasonic 1184)
also con emulate a Proprinter II, but only if you change the dip switch
setting.
Anyway, I've really haven't dug into this alot yet and I was wondering
if anyone had some info in this area. The Vectra is supposed to be able
to dump graphics using the Prt Screen command if the DOS "graphics"
command was given, but so far no luck.      Thanks in advance for anything.
                                             Mike M

Technical Details

Message-ID: <330007@col.hp.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!icdoc!inmos!inmos-c!col!mikem

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!icdoc!inmos!inmos-c!col!mikem
From: mikem@col.hp.com (Mike McTigue)
Newsgroups: comp.sys.ibm.pc
Subject: ? on DOS graphics dump
Message-ID: <330007@col.hp.com>
Date: 21 Feb 90 00:11:03 GMT
Organization: HP Colorado Springs Division
Lines: 9