Article View: comp.sys.ibm.pc
Article #42830Re: Changing CR/LF to CR on printer output
From: crmeyer
Date: Thu, 22 Feb 1990 04:18
Date: Thu, 22 Feb 1990 04:18
6 lines
719 bytes
719 bytes
In article <1990Feb21.122448.22508@lilink.com>, mikej@lilink.com (Michael R. Johnston) writes... >I have some printers here locally that I used to use with a TRS80 computer. >These printers ASSUME a linefeed when they see a carraige return... Most older Radio Shack printers I have seen are dip switch configurable for either assuming a LF with a CR or not.
Technical Details
Message-ID:
<4029@hub.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!hub!crmeyerShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!hub!crmeyer From: crmeyer@voodoo.ucsb.edu Newsgroups: comp.sys.ibm.pc Subject: Re: Changing CR/LF to CR on printer output Message-ID: <4029@hub.UUCP> Date: 22 Feb 90 04:18:56 GMT Sender: news@hub.UUCP Distribution: usa Organization: UC, Santa Barbara. Physics Computer Services Lines: 6