🚀 go-pugleaf

I am about to order a 386/33 [DOS 4.?] machine and want to 
a) make sure I'm not about to make a big mistake on the brand
b) make sure that I haven't missed any obvious useful options.

If you have experience or technical knowledge of any of the 
following please send me email and I will summarize to the net.

I want to buy an AST Premium 386/33Mhz as follows:

80386 CPU at 33Mhz
Zero wait state
1.2 Mb 5.25" floppy
1.44 Mb 3.5" floppy
4Mb RAM
7 expansion slots
CUPID Technology
1 Year Warranty			~$7,400 Canadian

OPTIONS:
either a Fujitsu 150Mb SCSI HD w/controller (25ms) $1,658 CDN  -OR-
       a Micropolis 300 Mb SCSI HD w/controller (15ms) 1/2 full height
			for $2,645 CDN

MAynard 150MB tape backup unit. $1,979 CDN

either a 80387/33 -OR- a wietek coprocessor (???) or a ??????


No monitor and no video card are included specifically on my request as
I have to go elsewhere for those to get what I need.

I am currently looking at two choices in monitors and cards:

NEC 5D (1280 x 1024) effective 1024 x 768 non-interlaced 256 colour out
of a palette of 16.7 million.  NEC Multisync Graphics engine (MGEAT256)

MSRP - $8,294.  CDN 

-OR-

Taxan Ultra Vision UV1150 (1600 x 1200) multisync non-interlaced 256
colour out of a palette of 16.7 million.  Pixelworks UltraClipper
(unknown code #).  

Discounted price - $7,976 CDN.

Should I be looking at other makes of 386/33? For example, ALR?  Are
there any options or things that I should watch out for.
I know a bit about the ISA/EISA and want to stay away from MCA.

Thanks in advance.  My decision is going to be made soon (i.e. by the
9th of March so if you have something to say send it along.)

Kevin
-- 
Kevin "auric" Crocker Athabasca University 
UUCP: ...!{alberta,ncc,attvcr}!atha!kevinc
Inet: kevinc@cs.AthabascaU.CA